• Gear box is lubricated by forced lubrication system.
  • Gears, spindle shaft and key are made from chrome molybdenum steel SCM415H. Grade JIS 1 carburizing harden and precise grinding to ensure running precision and long duration.
  • High grade casting is annealed and stress-released, providing high rigidity and wear resistance.
  • Hardened and ground double-nit ballscrews on 3 axes, providing high precision movement, and reduce heat deformation.
  • XYZ slideways, table and T-slot are hardened and ground.
  • Dovetail on X slideways, box ways on Y and Z.
  • 3 ways are coated with turcite-B.
  • 1:2 ratio timing belt boxes on XYZ to increase drive torque and save cost for axes motor.
  • XYZ axes driven by servo motor, standard with pendant control box, and individual buttons for each function allows the operator to work with ease.
  • YZ steel way covers protecting slideways and ballscrew from dust and coolant.


Specification MBGH-1600
Table size (L x W) 2200 x 500mm (86.61" x 19.69")
T-slot (Number x Size) 18 x 5 x 85mm (0.71'' x 0.20'' x 3.35'')
Longitudinal travel 1600mm (62.99'')
Cross travel 700mm (27.56'')
Vertical travel 700mm (27.56'')
Table load capacity 1000kgs
Spindle nose to table surace 70~770mm (2.76''~30.31'')
Spindle taper NST#50 Gear head
Spindle speed 50Hz Low: 104~466 High: 308~1400
60Hz Low: 125~560 High: 370~1100
Spindle speed step 6 steps
Spindle center to column surface 700mm (27.56'')
Feed rate
XYZ axes feed rate 0~750mm/min (0''~29.53'')
Rapid traverse XYZ axes 12M
Spindle motor 10HP
X,Y,Z motors DC 1200W
Coolant pump 1/6HP
Air Press 6kg / cm2
Power needed 12kw
Machine Length (A) 2930mm (115.35'')
Machine width (B) 3200mm (125.98'')
Machine height  (C) 2530mm (99.61'')
Net weight 4500kgs (9921lbs)

We reserve the right to modify and improve the specification without notice. The specification shown above is for reference only.