• High-rigidity spindle completed with roller bearing design for accurate cutting. No chatter happens during cutting process.
  • Gears, spindle shaft and key are made from chrome molybdenum steel SCM415H. Grade JIS 1 carburizing harden and precise grinding to ensure running precision and long duration.
  • Gear box is lubricated by forced lubrication system.
  • High grade casting is annealed and stress-released, providing high rigidity and wear resistance.
  • Hardened and ground double-nut ballscrews on 3 axes, providing high precision movement, and reducing heat deformation.
  • XYZ slideways, table and T-slot are hardened and ground.
  • 3 ways are coated with turcite-B.
  • Dovetail on X slideways, box ways on Y and Z.
  • 1:2 ratio timing belt boxes on XYZ to increase drive torque and save cost for axes motors.
  • XYZ axes are driven by servo motor, standard with pendent control box, and individual buttons for each function allows operator to work with ease.
  • YZ steel way covers protecting slidways and ballscrews from dust and coolant.


Specification MBG-1300
Table size (L x W) 1800 x 450 mm (70.87"x17.72")
T-slot (Number x Size) 18 x 5 x 70 mm (0.71''x0.20''x2.76'')
Longitudinal travel 1300 mm (51.18'')
Cross travel 600 mm (23.62'')
Vertical travel 700 m (27.56'')
Table load capacity 800kgs
Spindle nose to table surace 100~800 mm (3.937''~31.50'')
Spindle taper NST#50 Gear head
Spindle speed 50Hz Low: 104~466 High: 308~1400
60Hz Low: 125~560 High: 370~1100
Spindle speed step 6 steps
Spindle center to column surface 610 mm (24.02'')
Feed rate
XYZ axes feed rate 0~750 mm/min (0''~29.53'')
Rapid traverse XYZ axes 12M
Spindle motor 10 HP
X,Y,Z motors DC 800W
Coolant pump 1/6 HP
Air Press 6 kg / cm2
Power needed 12 kw 
Machine Length (A) 2930 mm (115.35'')
Machine width (B) 2750 mm (108.27'')
Machine height (C) 2435 mm (95.87'')
Net weight 3960 kgs (8730lbs)

We reserve the right to modify and improve the specification without notice. The specification shown above is for reference only.