B180 / B180VS
- X , Y power feed by option.
- XY axes double nut ACME leadscrews.
- Table size: 10”X 50”with longer saddle 650mm (25.6”).
- Rigid square ways on cross and column.
- Licensed Meehanite casting.
- Hardened and ground on X Y Z slideways and table.
- Turcite-B coated on X Y Z axes slideways and gibs.
- Head can be tilted 90 degrees right and left for angular machining.
- Counter-balance weight device for milling head.
Specification | B180 / B180VS | |
Table | ||
Table Size |
1270 x 250mm |
|
T slots of table (Qty x size) |
3 x 16mm |
|
Longitudinal travel (Manual) | 776mm | |
Longitudinal travel (Auto) |
696mm | |
Cross travel | 540mm | |
Quill travel | 500mm | |
Spindle to table nose(D) | 90~540mm | |
Spindle | ||
Spindle taper | NST#40 | |
Spindle speed (rpm) | Step head | 50 Hz low: 54 ~ 330 High: 475 ~2875 60 Hz low: 65 ~ 400 High: 570 ~ 3450 |
Variable speed head | 50 Hz low: 50 ~ 415 High: 415 ~3600 60 Hz low: 60 ~ 500 High: 500 ~ 4300 |
|
Stroke of quill on turret | 127mm | |
Quill feeds (mm/rpm) | 0.04mm~0.08mm ~0.14mm | |
Head swivel (R&L) | 45o | |
Spindle to column (E) | 565mm | |
Feed Rate | ||
X Y Z axes feed rates (permin) | Manual (Power feed option) | |
Rapid traverse X Y axes (permin) | Manual (Power feed option) | |
Rapid traverse of Z axis (permin) | Liftingmotor option 900mm | |
Motor | ||
Spindle drivemotor | 5HP | |
Drive on X axis | Manual (Power feed option) | |
Drive on Y axis | Manual (Power feed option) | |
Drive on Z axis | Manual (1/2HP Liftingmotor by option) | |
Coolant pump | By option (1/8HP) | |
Length x Width x Height (A x B x C) | 1800mm x 1600mm x 2050mm | |
Net weight | 2000kgs |
We reserve the right to modify and improve the specification without notice. The specification shown above is for reference only.